background image

 

SIMATIC Rack PC 840 V2  
Operating Instructions, Edition 05/2006, A5E00248055-04 

11-1

 

Maintenance and service 

11

11.1 

11.1 

Removing and installing hardware components 

Carrying out repairs 

Only authorized personnel are permitted to repair the device. 

 

 

Warning 
Unauthorized opening and improper repairs on the device may result in substantial damage 

to equipment or endanger the user. 

 

• 

Before you open the device, always disconnect the power plug. 

• 

Install only system upgrades designated for this computer. If you install other upgrades, 

you may damage the system or violate the safety requirements and regulations for radio 

frequency interference suppression. Contact your technical support team or your sales 

outlet to find out which system upgrades are suitable for installation. 

If you install or exchange system upgrades and damage your device, the warranty becomes 

void. 

 

 

Notice 
Note the ESB instructions. 

Limitation of Liability 

All technical data and licenses apply only to upgrades approved by SIEMENS. 
No liability can be accepted for impairment of functions caused by the use of third-party 

devices or components. 

Tools 

All mechanical installation tasks on the device can be carried out with Torx T10 and TORX 

T15 screwdrivers as well as a side-cutter. 

Summary of Contents for SIMATIC Rack PC 840 V2



















































































































































































Reviews: