Attachment to Industrial Ethernet
Electrical connectors
Properties
Quantity
6
Connector
RJ-45 jack
Properties
Half/full duplex, MDI‑X pinning
Transmission speed
10 / 100 Mbps
Optical connectors
Optical connectors
Quantity
2
Connectors
The attachment to Industrial Ethernet uses SC connector tech‐
nology (Subscriber Connector).
Properties
Transmission mode
100Base-FX complying with IEEE 802.3
Transmission rate
100 Mbps (Fast Ethernet)
Transmission medium
Multimode fiber-optic cable
Light source
LED/Class1-LASER "Eye safe"
Wavelength
1300 nm
Cable length (max.) *
)
At 50 µm fiber core diameter
3 km
At 62.5 µm fiber core diameter
3 km
Transmitter output (optical)
Minimum
At 50 μm
-24 dBm
At 62.5 μm
-20 dBm
Maximum
-14 dBm
Receiver input
Sensitivity min.
-31 dBm
Input power max.
-12 dBm
*) Depending on the cable used:
• If you are using at least OM1 fibers (attenuation ≤ 1.5 dB/km, bandwidth length product ≥
500 MHz*km), you can reach a cable length of up to 3 km.
• When are using fibers with attenuation values ≤ 1 dB/km, you can reach a cable length of up
to 5 km.
You can find additional information in the "Industrial Ethernet / PROFINET Passive network
components" System Manual, see also section "Introduction", paragraph "Additional
documentation".
Technical specifications
7.1 Technical specifications of the SCALANCE XC106-2 (SC)
SCALANCE XC-100
42
Operating Instructions, 06/2022, C79000-G8976-C415-06
