Certification
6.1.3 FCC
•
2014/34/EU
Directive 2014/34/EU of the European Parliament and of the Council of 26
February 2014 on the harmonisation of the laws of the Member States relating
to equipment and protective systems intended for use in potentially explosive
atmospheres (recast) Text with EEA relevance
•
EN 60079-0:2018
Explosive Atmospheres – Part 0: Equipment – General Requirements
•
EN 60079-15:2017
Explosive Atmospheres – Part 15: Equipment Protection by Type of Protection "n"
•
EN 60079-7:2015
Explosive atmospheres - Part 7: Equipment protection by increased safety "e"
6.1.3
FCC
This device has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated
in a commercial environment.
This device generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case users will be required to
correct the interference at their own expense.
Note
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this device.
6.1.4
FDA/CDRH
This device meets the requirements of the following U.S. Food and Drug
Administration (FDA) standard:
• Title 21 Code of Federal Regulations (CFR) – Chapter I – Sub-chapter J –
Radiological Health
6.1.5
ISED
This device is declared by Siemens AG to meet the requirements of the following
ISED (Innovation Science and Economic Development Canada) standard:
• CAN ICES-3 (A)/NMB-3 (A)
RUGGEDCOM RST916P
Installation Manual, 04/2021, C79000-G8976-1489-01
35
