Device Management
3.2 Configuring the Device
Pin
RJ45 Male DB9 Female
Name
Description
Comment
1
9
RI
Ring Indicator
The DSR, DCD and DTR pins are connected together internally.
The CTS and RTS pins are connected together internally.
RI is not connected.
Communication Ports
Connect any of the available Ethernet ports on the device to a management switch
and access the RUGGEDCOM M2100F console and Web interfaces via the device's IP
address. For more information about available ports, refer to
3.2
Configuring the Device
Once the device is installed and connected to the network, it must be configured.
All configuration management is done via the RUGGEDCOM M2100F interface.
For more information about configuring the device, refer to the
RUGGEDCOM ROS
Configuration Manual
associated with the installed software release.
20
RUGGEDCOM M2100F
Installation Manual, 04/2021, C79000-G8976-1342-08
