Approvals
Approvals
The SIMATIC NET products described in these Operating Instructions have the
approvals listed below.
Note
Issued approvals on the type plate of the device
The specified approvals apply only when the corresponding mark is printed on the
product. You can check which of the following approvals have been granted for your
product by the markings on the type plate.
EC directives
SIMATIC NET products meet the requirements and aims of the following EC
directives.
EMC directive
EMC directive (electromagnetic compatibility)
The SIMATIC NET products described in these operating instructions meet the
requirements of EC directive 2004/108/EC "Electromagnetic Compatibility" for the
following areas of application:
Requirements
Field of application
Emission
Immunity to interference
Industry
EN 61000-6-4 : 2007
EN 61000-6-2 : 2005
Note for Australia
The product meets the requirements of the AS/NZS 2064 standard (Class A).
WARNING
Personal injury and property damage can occur
The installation of expansions that are not approved for SIMATIC NET products or
their target systems may violate the requirements and regulations for safety and
electromagnetic compatibility.
Only use expansions that are approved for the system.
Power supply PS598-1 for SCALANCE XR-500M
24
A5E03275848A-01, 09/2011
