SIMATIC ITP1000
Operating Instructions, 05/2017, A5E37340160-AB
23
Safety notes
2
2.1
General safety instructions
This device is compliant with the relevant safety measures to IEC, EN, VDE, UL, and CSA.
You can get information on reliability of use of the device in the intended environment from
our Service contact partners.
Use of the device
CAUTION
Observe safety instructions
Please note the legal information at the start of this document
You should not expand your device before you have read the relevant safety instructions.
WARNING
Risk of the device falling
If the device falls, because it is accidentally let go, this can lead to personal injury or
damage to property.
Take suitable precautions to avoid this danger.
CAUTION
Hazardous emission of light
For devices that are equipped with a camera, a camera LED for lighting and the camera's
flash are located on the rear of the device (Page 14).
The camera LED is assigned to Risk Group 2 according to IEC/EN 62471 and can, if used
improperly, damage the eyes. The risk for the user depends on the use of the camera.
Do not look directly in the light beam of the camera LED when using the camera.
Keep a distance of at least 20 cm between your eyes and the camera LED.
Figure 2-1
Warning notice on the rear of the device.