Siemens SIMATIC IPC427E Operating Instructions Manual Download Page 97

Page: 97 / 164

Technical specifications

8.2 Declaration of conformity

SIMATIC IPC427E
Operating Instructions, 09/2017, A5E37454814-AB

8.2

Declaration of conformity

8.2.1

CE marking

The device meets the guidelines listed in the following sections.

EU Declaration of Conformity
The associated declaration of conformity is available on the Internet at the following address:

EC Declaration of Conformity, UL approval Canada/USA

(

https://support.industry.siemens.com/cs/ww/en/ps/23703

8.2.2

Electromagnetic compatibility, Industrial and Residential Areas

Electromagnetic compatibility

This product meets the requirements of EC Directive 2014/30/EU "Electromagnetic

Compatibility".
The device is designed for the following areas of application corresponding to the CE

marking:

Scope of application

Requirements for

Interference emission

Immunity to interfer-

ence

Industrial area

EN 61000-6-4

EN 61000-6-2

Residential and commercial areas

and small businesses

EN 61000-6-3

EN 61000-6-1

RoHs directive

This product meets the requirements stated in the RoHS directive (Restriction of Hazardous

Materials): 2011/65/EU
Compliance with the directive has been reviewed according to the following standard:

EN 50581

Summary of Contents for SIMATIC IPC427E





































































































































































Search results

Summary of Contents for SIMATIC IPC427E

Reviews:

Related manuals for SIMATIC IPC427E

Brands by name

Popular brands

Siemens SIMATIC IPC427E, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC IPC427E

Reviews:

Related manuals for SIMATIC IPC427E

Brands by name

Popular brands