Siemens SIMATIC IPC427E Operating Instructions Manual Download Page 61

Page: 61 / 164

SIMATIC IPC427E
Operating Instructions, 09/2017, A5E37454814-AB

Expanding and assigning parameters to the device

6.1

Installing and removing the memory module

6.1.1

Opening the device

Note
Work on the open device may only be carried out by authorized and qualified personnel.

Within the warranty period, you may only expand the hardware with memory and expansion

cards.

NOTICE
The device contains electronic components that may be destroyed by ESD
You therefore need to take precautionary measures before you open the device. Please

refer to the ESD Directives on handling electrostatic-sensitive components in ESD guideline

(Page 98).

Requirement

●

The device is disconnected from the power supply.

●

1 T10 screwdriver

Summary of Contents for SIMATIC IPC427E





































































































































































Search results

Summary of Contents for SIMATIC IPC427E

Reviews:

Related manuals for SIMATIC IPC427E

Brands by name

Popular brands

Siemens SIMATIC IPC427E, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC IPC427E

Reviews:

Related manuals for SIMATIC IPC427E

Brands by name

Popular brands