Installing and connecting the device
3.1 Preparing for installation
SIMATIC IPC327E
18
Operating Instructions, 06/2019, A5E40965257-AD
Obtain the data from the product label and COA label. The product label is located on the
back panel of the device. The COA label is only available in pre-installed Windows operating
systems and is affixed to the rear of the device.
Procedure
1.
Get the information of order number, serial number, production version (FS), and
Ethernet addresses from the product label. Below is an example of a product label.
Note
Replacement device without storage media
When you order a replacement device, remove all the storage media from your device,
for example HDD. Insert the storage media into the replacement device.
2.
Take down the Windows "Product Key" from the COA label.
Example of a COA label
Microsoft Windows "Product Key" on the "Certificate Of Authenticity" (COA):
The COA label is only attached to the rear of the device containing a preinstalled and
activated Windows operating system.
●
COA label of a device with Windows operating system
