Siemens SIMATIC IPC227G Operating Instructions Manual Download

Page: 70 / 106

Technical specifications

7.4 Technical data

SIMATIC IPC227G

Operating Instructions, 06/2021, A5E50059933-AA

Mechanical ambient conditions

Vibration resistance

, tested in accordance with IEC 60068-2-6

Operation

Except DIN-Rail:
•

5 to 8.4 Hz: 3.5 mm

•

8.4 to 500 Hz: 9.8 m/s²

DIN-Rail:
•

10 to 58 Hz: 0.0375 mm

•

58 to 200 Hz: 4.9 m/s²

Storage/transport

•

5 to 8.4 Hz: 3.5 mm

•

8.4 to 500 Hz: 9.8 m/s

Shock resistance

, tested in accordance with IEC 60068-2-27

Operation

With SSD:
•

150 m/s², 11 ms

•

5g, 30 ms

Storage/transport

•

250 m/s

, 6 ms

7.4.3

Power demand of the components

Maximum power consumption of the auxiliary components

Auxiliary components

Maximum permitted

power consumption

Max. total power

+5 V

+3.3 V

USB device 3.1

High current

900 mA

6 W (for all USB devices)

USB Device 2.0

High current

500 mA

M.2 Module (slot

X100)

Per slot

1.5 A

5 W in total

M.2 Module (slot

X101)

Per slot

1.5 A

Note
Device may overheat!

The power supply cannot make unlimited power available. The auxiliary components

consume energy and produce heat.
The device may overheat. The auxiliary components will be damaged.

Summary of Contents for SIMATIC IPC227G











































































































Search results

Summary of Contents for SIMATIC IPC227G

Reviews:

Related manuals for SIMATIC IPC227G

Brands by name

Popular brands

Siemens SIMATIC IPC227G, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC IPC227G

Reviews:

Related manuals for SIMATIC IPC227G

Brands by name

Popular brands