Siemens SIMATIC Ident System Manual Download Page 128

Page: 128 / 362

Readers

5.7 SIMATIC RF290R

SIMATIC RF200

128

System Manual, 07/2015, J31069-D0227-U001-A9-7618

5.7

SIMATIC RF290R

5.7.1

Features

SIMATIC RF290R

Characteristics

Design

①

RS-422/RS-232 interface, 24 V power supply

②

Digital I/O

③

External antenna

④

Operating display, 4 LEDs:

•

Power (PWR)

•

Active (ACT)

•

Present (PRE)

•

Error (ERR)

Application

Identification tasks in production control and in

intra-logistics, e.g. skid identification, container

management, HF gates (F&B)
When connected via a PC multitag operation is

possible.

Note
Reader requires external antennas
Note that the RF290R reader is designed only for operation with external antennas and can

only be operated in conjunction with the antennas ANT D5, D6 or D10.

Note
Note on operating the reader with ANT D6 / D10

When operating with a power ≥ 3 W, the limits are adhered to according to 2004/40/EC

(minimum requirements concerning the protection of workers). Note that the antennas may

only be used in an "industrial environment" and not in buildings used by the public.

Summary of Contents for SIMATIC Ident











































































































































































































































































































































































Search results

Summary of Contents for SIMATIC Ident

Reviews:

Related manuals for SIMATIC Ident

Brands by name

Popular brands

Siemens SIMATIC Ident, System Manual

Search results

Summary of Contents for SIMATIC Ident

Reviews:

Related manuals for SIMATIC Ident

Brands by name

Popular brands