Operation via the CB Gate user interface
8.2 Menu items
SIMATIC Ident CB Gate
Operating Instructions, 08/2022, C79000-G8976-C671-01
47
8.2.2
"Logging" menu item
Information on the 50 last read operations is displayed in the "Logging" menu item.
Figure 8-3
"Logging" menu item
Table 8- 5
Information displayed about the detected transponders
Information
Description
Times stamp
Time stamp when the transponder was identified the first time.
The time stamp is shown in the following format:
| Y| Y| Y| Y| -| M| M| -| D| D| | H| H| :| M| M| :| S| S| .|MS|MS|MS|
EPC ID
ID of the identified transponder
Note: If the read operation was not successful, a corresponding error message
is output instead of the EPC ID.
Orientation
Orientation/position detection of the object
Note: If the orientation was not detected, "Unclear" is output.
Ten read operations are displayed per page. You can switch between the individual pages
with the "<" and ">" buttons. You can delete the logbook or all entries in it with the "Reset
logging" button.
