manualshive.com logo in svg

Siemens SIMATIC HMI series, System Manual

The Siemens SIMATIC HMI series offers a comprehensive range of user-friendly Human Machine Interface devices. To assist users in getting started, we provide an extensive collection of free downloadable manuals. Simply visit manualshive.com and download the user manual to unlock the potential of your Siemens SIMATIC HMI device.

Share
Download
background image

5.3

Conditions for Migration

Introduction

You can migrate a WinCC project on any computer on which WinCC V7.4 has been installed. 

The WinCC Project Migrator is included in the standard installation scope of WinCC V7.4.
Use Project Duplicator to copy the configuration data of the project to the migration computer. 

For information on copying projects, refer to the "Working with projects" > "Copying and 

duplicating projects" section in the WinCC Information System.
The code page settings of projects that you want to migrate in a single step must be uniform. 

Requirements

The computer on which the migration should be performed must fulfill the following conditions:

 

Requirement

Operating system

The requirements are specified in the "Hardware requirements" and 

"Software requirements" section of the installation instructions.

CPU
RAM
Free memory space on the 

hard disk

In addition, at least the size of the overall project. Migration increases 

the size of the projects.

User Rights

User must be a member of the "SIMATIC HMI" group

WinCC version installed

WinCC V7.4

WinCC version project data

WinCC V7.3, V7.2, V7.0 or V6.2 SP3

Licenses

New V7.4 RC license or RT license for PowerTags

System status

WinCC closed: 
● Runtime deactivated
● WinCC Editors closed
● WinCC Explorer closed

See also

How to migrate SQL Server 2000 databases (Page 142)

Migration

5.3 Conditions for Migration

WinCC: General information and installation

System Manual, 02/2017, A5E40840020-AA

141

Summary of Contents for SIMATIC HMI series



































































































































































































































Reviews:

No comments

Related manuals for SIMATIC HMI series

QCON ProX Setup preview
ProX
Brand: QCON Pages: 4
Watlow F4T Quick Start Manual preview
F4T
Brand: Watlow Pages: 4
Ban Seok BV-322M User Manual preview
BV-322M
Brand: Ban Seok Pages: 9
Absima CR9T Quick Start preview
CR9T
Brand: Absima Pages: 5
IN-COMMAND NCSP35CM Installation And Operation Manual preview
NCSP35CM
Brand: IN-COMMAND Pages: 47
SYCLOPE TRACE'O Manual preview
TRACE'O
Brand: SYCLOPE Pages: 60
Lauda LRZ 921 Operation Manual preview
LRZ 921
Brand: Lauda Pages: 40
Sielco Elettronica D1-15A User Manual preview
D1-15A
Brand: Sielco Elettronica Pages: 15
ASROCK iEP-5000G Series Quick Installation Manual preview
iEP-5000G Series
Brand: ASROCK Pages: 2
Runxin N74Q1 Quick Start Manual preview
N74Q1
Brand: Runxin Pages: 4
Pangolin FB4 Series User Manual preview
FB4 Series
Brand: Pangolin Pages: 35
ICS Tunnel Master Jr User Manual preview
Tunnel Master Jr
Brand: ICS Pages: 70
Daspi PIXELP Instruction Manual preview
PIXELP
Brand: Daspi Pages: 16
Daikin BRC7E63W Operation Manual preview
BRC7E63W
Brand: Daikin Pages: 16
EDI SmartMonitor MMU2-16LE Series Operation Manual preview
SmartMonitor MMU2-16LE Series
Brand: EDI Pages: 62
Navilock 62745 Manual preview
62745
Brand: Navilock Pages: 14
Feig Electronic ISC.ANT.U500/270DM-E Manual preview
ISC.ANT.U500/270DM-E
Brand: Feig Electronic Pages: 117
DMP Electronics XR200 Programming Manual preview
XR200
Brand: DMP Electronics Pages: 56

Brands by name

Popular brands

Load more brands