4-7
OP37/Pro Equipment Manual
Release 7/98
This screen contains the settings for the system’s “Plug-and-Play” functions.
The settings have been selected for optimum system performance and should
therefore not be altered.
ROM PCI/ISA BIOS (2A59F000)
CMOS SETUP UTILITY
AWARD SOFTWARE, INC.
Resources Controlled By : Manual
Reset Configuration Data : Disabled
IRQ–3 assigned to : Legacy ISA
IRQ–4 assigned to : Legacy ISA
IRQ–5 assigned to : PCI/ISA PnP
IRQ–7 assigned to : PCI/ISA PnP
IRQ–9 assigned to : PCI/ISA PnP
IRQ–10 assigned to : PCI/ISA PnP
IRQ–11 assigned to : PCI/ISA PnP
IRQ–12 assigned to : PCI/ISA PnP
IRQ–14 assigned to : PCI/ISA PnP
IRQ–15 assigned to : PCI/ISA PnP
DMA–0 assigned to : PCI/ISA PnP
DMA–1 assigned to : PCI/ISA PnP
DMA–3 assigned to : PCI/ISA PnP
DMA–5 assigned to : PCI/ISA PnP
DMA–6 assigned to : PCI/ISA PnP
DMA–7 assigned to : PCI/ISA PnP
PCI IRQ Actived By : Level
PCI IDE IRQ Map To : PCI–AUTO
Primary IDE INT# : A
Secondary IDE INT# : B
ESC: Quit
↑ ↓ → ←
:Select Item
F1 : Help PU/PD(+/– : Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
Figure 4-5
“PNP/PCI Configuration” screen
PNP/PCI
Configuration
User-Specific Settings
Summary of Contents for SIMATIC HMI OP37/Pro
