Chapter
2
System Components
2-14
SIMATIC HawkEye™ 1600T Smart Camera Guide
Rev. 1E, Nov 2007
Field I/O Wiring Examples
Input Opto Wiring
Figure 2–9 shows the input opto wiring for isolated NPN and PNP sources.
FIGURE 2–9.
Trigger Input Opto Wiring (NPN and PNP)
Figure 2–10 shows the input opto wiring for non-isolated NPN and PNP sources.
FIGURE 2–10.
GPIO Input Opto Wiring (NPN and PNP)
Note 1: GPIO OUT COM typically connected to ground.
Note 2: GPIO OUT COM typically connected to Voltage.
IN A (or IN B)
15-30V
Signal
Signal
15-30V
Camera
PNP Source
Camera
NPN Sink
IN B (or IN A)
IN A (or IN B)
IN B (or IN A)
GPIO OUT COM
See Note 1
GPIO IN COM
GPIO x
15-30V
Signal
See Note 2
GPIO IN COM
GPIO x
Signal
15-30V
GPIO OUT COM
Camera
PNP Source
Camera
NPN Sink
Summary of Contents for SIMATIC HawkEye 1600T Series
