Siemens SIMATIC HawkEye 1600T Series, Manual

Page: 23 / 79

SIMATIC HawkEye™ 1600T
System Components
2
Rev. 1E, Nov 2007 SIMATIC HawkEye™ 1600T Smart Camera Guide 2-3
can connect to the camera, each one with their private peer-to-peer connection
and each one monitored by a special *heartbeat* connection on port 49079 (see
Table 2–2).
TABLE 2–2.
SIMATIC HawkEye™ 1600T TCP/IP Connectivity
Port Name Protocol Number Note
File Transfer Port FTP 21 Allows the Host to send and retrieve files from the
HE1610T.
Telnet Port Telnet 23 Console terminal to the Device, runs the vxWorks OS
console target shell.
DHCP Client Port DHCP 68 Supports the assignment of IP addresses from a DHCP
server for the HE1610T Smart Camera.
Web Server HTTP 80 Allow access to boot parameters when HyperTerminal
over Serial and Bootloader menu is not convenient.
Routing Port RIP 520 Receives and updates local routing tables from the
Network.
IO Service Port TCP 49049 Controls IO on the camera, i.e., Physical and Virtual IO
and receives IO change notification events back to the
client.
Pic and Live
Acquire Port TCP 49050 Takes pictures and goes to Live Video.
Camera RPC Port TCP 49059 When in control, sends editing and runtime commands
to the camera; for example, Start, Stop, Download,
Flash, etc...
Connection
Monitor Port TCP 49079 This special connection is created automatically
whenever any of the other connections above is made
by a client (when using the vskit libraries or by
FrontRunner). It monitors the connections and provides
a timely mechanism to report connection drops to the
client (within a few seconds).
Reports &
Statistics Port TCP 49200 Used by FrontRunner and vskit programming library for
camera reports. Reports are defined by the avp and
can include any results with or without images.
Connections can be programmed to be lossless, i.e.,
inline with the Inspection or lossy, i.e., at a particular
rate per second.
PartQ Retrieval
Port TCP 49201 Retrieves the reports records stored inline in camera
memory.