Siemens Simatic Field PG, Manual

Page: 44 / 142

Configuring And Operating The SIMATIC Field PG
3-4
SIMATIC Field PG Manual
A5E00075760-04
3.2 Connecting to the Power Supply
Connecting to the Power Supply
The SIMATIC Field PG can be operated with the supplied external AC adapter
on 120 V/230 V power systems or with the battery. The external power supply
automatically selects the voltage. You should install the supplied battery pack
before you connect the device to the power supply:
1. Turn the Field PG over and place it down on the table while the display unit is
closed.
2. Unlock and open the battery pack cover on the bottom of the device.
3. Insert the battery pack.
4. Close the cover and turn the device over again.
5. Plug the supplied patch cord into the external power supply and plug the
low-voltage plug into the unit’s connector.
6. Connect the external power supply to a socket outlet with grounded protective
conductor.
Connector for an external power supply
V
N
= 17.5 V DC
Fig. 3-2 Power supply connection
!
Warning
The SIMATIC Field PG must only be operated with the provided power supply unit
and/or battery pack.
The external power supply must not be covered up (risk of over-heating).
For reasons of safety you must use the patch cord and power supply that is inclu-
ded in the delivery. Operation of the unit is only permitted on grounded 120V/230V
power supply networks.