Siemens SIMATIC ET 200C, Manual

Page: 129 / 333

5-7
ET 200C Distributed I/O Station
EWA 4NEB 812 6119-02b
5.1.3 Enter Station Name, Addresses and Address Identifier
After the station type has been entered (see Section 5.1.2), additional entry
fields for configuring the inputs and outputs appear in the “CONFIGURING”
screen.
If required, you can assign a name to the ET 200C distributed I/O station in
the “Station name” entry field (all keyboard characters are permitted).
COM ET 200 automatically displays the next available address for the digital
inputs (DI), digital outputs (DQ), analog inputs (AI) and analog outputs
(AQ).
When selecting the “CONFIGURING” screen for the first time in the se-
lected program file, the next available addresses are set to “0”.
The addresses of the inputs/outputs of the ET 200C station are defined as
follows:
1. If required, enter in the “Next free address” entry fields another free
address that you wish to use for the inputs or outputs of the ET 200C
station.
Entry options:
For linear addressing: 0 to 255
For Q dual-port RAM addressing: 0 to 254
For P dual-port RAM addressing: 192 to 254
2. Enter the address identifiers of the ET 200C in the entry fields of the
”Configuration” area (Fig. 5-3: ).
Requirement:
The cursor must be positioned at the entry field for the address identifier
(slot).
Note
All output ports are assigned the slot ”0.” in the case of digital ET 200C
modules. All input ports are assigned the slot ”1.”.
Entry option:
Enter the address identifiers as decimal numbers (see table 5-2).
Basic Requirement
“ Station Name”
“ Next Available
Address”
Procedure:
Enter Addresses
and Address
Identifiers
Address Assignment and Parameterization with COM ET 200