background image

 

SIMATIC Box PC 827B 
Getting Started, 07/2008, A5E01127540-02 

39

 

Appendix 

A

A.1

 

Guidelines and declarations 

Notes on the CE Label 

 

 

The following applies to the SIMATIC product described in this documentation: 

EMC Directive 

The devices fulfill the requirements for the EC directive "2004/108/EEC Electromagnetic 

Compatibility", and the following fields of application applies according to this CE label: 

 

Fields of application  

Requirement for 

 

Emitted interference 

Immunity to interferences 

Residential, business and trade 

areas and small businesses. 

EN 61000-6-3: 2007 

EN 61000-6-1: 2007 

Industry 

EN 61000-6-4: 2007 

EN 61000-6-2: 2005 

The device is also compliant with EN 61000-3-2:2006 (harmonic currents) and  

EN 61000-3-3:1995 +A1:2001 +A2:2005 (voltage fluctuation and flicker.)  

Low-voltage directive 

The devices with AC and DC power supply are compliant with the requirements of the EC 

Directive 2006/95/EEC "Low-Voltage Directive." Conformance with this directive has been 

verified according to EN60950-1:2001 +A11:2004. 

Declaration of conformity 

The EC declaration of conformity and the corresponding documentation are made available 

to authorities in accordance with the EC directives stated above. Your sales representative 

can provide these on request. 

Note the installation guidelines 

The installation guidelines and safety instructions given in this documentation have to be 

noted during commissioning and operation. 

Summary of Contents for SIMATIC Box PC 827B













































Reviews: