Siemens SIMATIC 277 IWLAN, Getting Started

Page: 13 / 109

9
HMI Device Mobile Panel 277 IWLAN
Getting Started, 04/2008, A5E01004533-01
2.2 Configuring the Access Point
Configuration during Commissioning with the Primary Setup
Tool
The Primary Setup Tool is used to configure the access point. The WLAN is set
up when you commission an access point. The Primary Setup Tool is supplied in
the access point package.
Requirements
• The access point has a power supply and is switched on.
• The Primary Setup Tool is installed on the configuring PC.
• The configuring PC is connected to the access point by a network cable.