manualshive.com logo in svg

Siemens SIMADYN D FM 458, User Manual

Share
Download
Siemens SIMADYN D FM 458 User Manual Download Page 42

Product description

Application Module FM 458 - User Manual

2-31

6DD1904-0AE0     Edition 12.2001

2

2.4.2 Performance features

•

  Master- or slave interface for PROFIBUS-DP

incl. the functions "Shared Input“, SYNC, FREEZE

•

  Data transfer rates from 9.6 kbit/s to 12 Mbit/s

•

  Max. 127 slaves can be connected (dependent on the configuration)

•

  Telegram length of max.. 244 bytes per slave

•

  RS 485 interface for PROFIBUS-DP, floating

•

  RS 232 interface to parameterize the bus node

•

  Two displays (LED) to indicate the operating status of the

communications interface and the bus activity

•

  Optionally, additional functions can be implemented using plug-on

modules, e.g. SLB for SIMOLINK:

−

  SIMOLINK with master function to control up to

200 MASTERDRIVES

−

  SIMOLINK with slave function for establishing a fast coupling to

SIMADYN D or several FM 458

•

  DP master with COM PROFIBUS

•

 LE 

bus

The LE bus ensures fast data transfer between the FM 458 application
module and its expansion modules EXM 438/EXM 438-1/EXM 448.

•

 P 

bus

The peripheral bus (P bus) is the parallel SIMATIC backplane bus,
which only provides the power supply for the EXM 448.

Summary of Contents for SIMADYN D FM 458




























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands