Siemens SICAM AK 3, User Manual

Page: 193 / 260

Engineering via SICAM TOOLBOX II
SICAM RTUs, SICAM AK 3 User Manual
193
DC2-028-2.03, Edition 07.2016
4.1.8.1 Hardware Configuration
You can initiate the documentation of the system elements in the plant tree of the menu
System technique
, via the context menu of the automation unit.
The output takes place as a table in a file (format
.csv
) or to a printer.
With the tool "HW-FW Configuration" you can assign the required assembly-technical infor-
mation to the system elements.
4.1.8.2 Assembly Technique
You can initiate the documentation of the assembly-technical configuration in the plant tree of
the menu
System technique
, via the context menus of the peripheral elements.
The output takes place as a table with adjustable layout, optionally as preview on the screen
or to a printer.
The documentation extends over the HW pins of the respective peripheral elements and con-
tains:
•
Slot and module type
•
System-technical address of each pins within the message
•
Process-technical address of each pins within the message
•
Common information of a pin (long text)
•
Assignment of the pins to a link image in the "OPM II"
4.1.8.3 Interface to ELCAD
For the coupling with the design tool ELCAD, it is possible to transfer images that are as-
signed to a system element via this defined interface.
The output takes place to a text file (format
asc
).
The generation of the file takes place via selection of the menu
Destination systems
|
SICAM RTUs…
|
SICAM RTUs Transformer
.
You find the details thereto in the SICAM TOOLBOX II Online Help , chapter "OPM II", section
"Elcad" .