23
Quick Installation Guide
Gigaset SE505 dsl/cable / -- / A31008-E505-B100-1-PED1 / qig_router_engl.fm / 07.07.2003
deutsch
en
glish
fr
an
ça
is
it
alian
o
ne
de
rl
an
ds
españ
ol
suom
i
dansk
sv
ensk
a
no
rs
k
por
tugué
s
Setting up the network
You must set up the network so that the PC can work with the router. First, configure
the TCP/IP settings of the PC which you have connected to the router.
Depending on the operating system, proceed as follows:
Windows 98/ME
1. Select
Start
–
Settings
–
Control panel
.
2. Double-click the
Network
icon.
3. In the
Network
window, select the
TCP/IP
option for your network card or adapter
on the
Configuration
tab. Make sure you select the correct TCP/IP option if several
are offered on the pick list (e.g. "
TCP/IP -> Siemens Gigaset PC Card 54
" or
"
TCP/IP -> Siemens Gigaset PCI Card 54
").
4. Click
Properties
.
5. Click the
IP address
tab and check the
Automatically obtain IP address
option.
6. Click the
Gateway
tab and remove any entries from the
Installed Gateways
list.
7. Click
OK
twice to close the
Network
window.
8. Restart your network (see page 24).
Windows 2000
1. Click on
Start
–
Settings
–
Control panel
.
2. Double-click on the
Network and dial-up connections
icon and then on the
LAN
connection
icon.
3. Click on the
Properties
button in the
General
tab.
4. In the
Properties of LAN connection
window, select the
TCP/IP
option for your
network card or adapter. Make sure you select the correct TCP/IP option if several are
offered on the pick list (e.g. "
TCP/IP -> Siemens Gigaset PC Card 54
" or
"
TCP/IP -> Siemens Gigaset PCI Card 54
").
5. Click on the
Properties
button.
6. Activate the options
Automatically obtain IP address
and
Automatically obtain
DNS server address
on the
General
tab.
7. Click
OK
or
Close
to close each window.
8. Restart your network (see page 24).
