24
Quick Installation Guide
Gigaset SE505 dsl/cable / -- / A31008-E505-B100-1-PED1 / qig_router_engl.fm / 07.07.2003
Windows XP
Once you have deactivated the Windows configuration you can set up the network:
1. Click on
Start
–
Control panel
.
2. Click on the
Network and Internet connections
icon and then on the
Network
connections
icon.
3. Double-click on the LAN connection with which you are connected to the router.
4. On the
General
tab, click
Properties
.
5. Select
Internet protocol (TCP/IP)
and click on the
Properties
button.
6. Activate the options
Automatically obtain IP address
and
Automatically obtain
DNS server address
on the
General
tab.
7. Click
OK
or
Close
to close each window.
8. Restart the network (see below).
Restarting the network
1. Restart the router by briefly unplugging the mains adapter from the mains socket
and then plugging it back in again.
2. Make sure the power LED on the front of the router is on continuously.
3. Restart your PC.
You have now configured and opened a link between your PC and the Gigaset SE505
dsl/cable.
i
Make sure that the
Use Windows to configure the settings
function has
been deactivated.
This can be done as follows:
1. Click on
Start
–
Control panel
–
Network and Internet connections
–
Network connections
–
LAN or high-speed Internet
.
2. Right click on wireless network connection, then click on
Properties
.
3. In the
Wireless networks
tab deactivate
Use Windows to configure
the settings
.
