Operating Instruction
LCD-Monitor SCD 1815-E
page 47 / 52
DOC-Nr.:
B30055DE6.doc
3.9.3. OSD-Menu-Function
Invoke via key
<
MENUE>
Main menu
Function
Adjust function / value / range
Description
Picture 1
Brightness
setting range:
0 to 100 through key (+/-)
adjust brightness
Contrast
setting
range:
0 to 100 through key (+/-)
adjust contrast
change contrast between dark and light colors
H Position
setting range:
0 to 100 through key (+/-)
move picture in horizontal direction
V-Position
setting
range
:
0 to 100 through key (+/-)
move picture in vertical direction
Phase setting
range
:
0 to 31 through key (+/-)
adjust phase of input signal
Frequency
setting
range
:
950 to 1050 (dependent to picture)
through key (+/-)
adjust frequency of input signal
Scaling
fill all; fill aspect ratio, one to one
select predefined scaling
adv. scaling
setting range :
950 to 1050 (dependent to picture)
through key (+/-)
adjust non-linear scaling
Picture 2
Sharpness
1, 2, 3, 4, 5
adjust sharpness of the picture by using no. 1 to 5
1=sharp, 5= soft
Gamma
Linear or CRT
correction of gamma curve
value of colors will be forwarded to the display
Color temperature
5000 - 6500 – 9300 - VAR
color temperature / adjust color
three defined and one adjustable color temperatures are for
selection
activate „VAR“ - for RGB shows up a adjustment beam. 0 to
100 % (50% correspond to factor 1)
Options 1
OSD
select between nine defined OSD positions f
define position OSD
OSD H-Position
setting range :
0 to 100 through key (+/-)
move OSD-menu in horizontal position
OSD V-Position
setting range :
0 to 100 through key (+/-)
move OSD-menu in vertical position
OSD timeout
5 ... 60 seconds
adjust time after the OSD menu is automatically fade out
the adjustment ensures between 5 to 60 s in steps of5 s.
OSD background
Opaque – Transparent
select background color of the OSD menu
you have the choice between transparent and colored
background.
Noise suppression
ON - OFF
Standard adjustment OFF.
By ON: Activate the function noise suppression. This function
suppresses interference at the sync signal lines to avoid
A new auto adjustment during short interference.
