Operating Instructions
3
Operation and Alignment
This chapter contains a description of all the operating and alignment functions.
3.1
Location of the Operation and Alignment Controls
All the controls are accessible from the rear of the unit. Their exact position is shown in Fig. 1
and Fig. 2. These controls are used for navigating in the OSD menu and for selecting and
altering parameters.
Fig. 2: Location of the operation and alignment controls
The functions of the keys are described in chapter 3.2.1 and 3.2.2.
3.2
Adjusting the Converter
The first time the unit is switched on it will automatically adjust to the graphic card currently
being used.
OSD-Menu / Quick-OSD-Menu
The „On Screen Display“ OSD is a menu system, which is shown on the display. With the
help of OSD and the described control elements, all adjustments of the monitor are
executable. There are just 4 keys to control the OSD.
In addition to the
OSD
menu there is the possibility to adjust important functions like
brightness, contrast and automatic adjustment directly via a
Quick-OSD-menu.
LCD-Monitor SCD 1597-I
Page 34 / 41
DOC-No.: B30149DE3.DOC
