Description of the device
2.5 SELECT / SET button
SCALANCE XP-200
Operating Instructions, 05/2016, C79000-G8976-C428-01
35
2.5
SELECT / SET button
NOTICE
Loss of water and dust protection
If the film of the button is damaged, the device is not water and dust proof.
Make sure that the film of the button does not get damaged. Do not use e.g. sharp objects
to press the button.
Position
The "SELECT/SET" button is located on the front of the SCALANCE XP-200.
Figure 2-2
SELECT/SET button
Setting the display mode
To set the required display mode, press the "SELECT/SET" button.
For more detailed information on the display modes, refer to the section "LEDs "DM1" and
Summary of Contents for SCALANCE XP-200
Page 8: ...Introduction SCALANCE XP 200 8 Operating Instructions 05 2016 C79000 G8976 C428 01 ...
Page 84: ...Dimension drawings SCALANCE XP 200 84 Operating Instructions 05 2016 C79000 G8976 C428 01 ...
Page 92: ...Approvals SCALANCE XP 200 92 Operating Instructions 05 2016 C79000 G8976 C428 01 ...
