Siemens SCALANCE X302-7EEC Operating Instructions Manual Download

Page: 263 / 322

Approvals, certificates, standards

9.7 Product group XR-300M PoE

SCALANCE X-300
Operating Instructions, 05/2016, A5E01113043-20

263

cULus Approval Hazardous Location

cULus Listed I. T. E. FOR HAZ. LOC.
Underwriters Laboratories Inc. complying with

●

UL 60950-1 (Information Technology Equipment)

●

ANSI/ISA 12.12.01-2007

●

CSA C22.2 No. 213-M1987

Approved for use in

Cl. 1, Div. 2, GP A, B, C, D T4

Cl. 1, Zone 2, GP IIC T4
Report no. E240480

Note
Only variants with 24 VDC power supply meet the requirements of this approval.

Railway approval

The TS variant of the device meets the requirements of the Railway standard EN

50155:2007 "Railway Applications - Electronic equipment used on rolling stock".

Note
When used on railway stock, a stabilized power supply must be used to comply with

EN50155.

9.7.2

SCALANCE X-300 declaration of conformity

You will find the EC Declaration of Conformity for these products on the Internet at the

following address:
SCALANCE X-300 declaration of conformity

(

https://support.industry.siemens.com/cs/ww/en/ps/15296/cert

)

Click on the entry "SCALANCE X-300 managed" in the navigation panel at the top edge

of the window and from the drop-down list that opens, select the entry for your product

group.

Select the entry "Certificate" from the "Entry type"drop-down list.

Result: A list of the available certificates is displayed.

Summary of Contents for SCALANCE X302-7EEC



































































































































































































































































































































Search results

Summary of Contents for SCALANCE X302-7EEC

Reviews:

Related manuals for SCALANCE X302-7EEC

Brands by name

Popular brands

Siemens SCALANCE X302-7EEC, Operating Instructions Manual

Search results

Summary of Contents for SCALANCE X302-7EEC

Reviews:

Related manuals for SCALANCE X302-7EEC

Brands by name

Popular brands