Connecting
5.2 Ports
SCALANCE X-400
112
Operating Instructions, 06/2015, C79000-G8976-C186-12
13. Close the cover and turn the lock-
ing mechanism with your hand as far
as possible in the direction of the ar-
row.
14. Insert a 2.5 mm screwdriver into the
hole in the locking mechanism and
continue turning it as far as the limit
stop.
15. The connector is correctly locked
when the opening of the locking mech-
anism is at the side and the side edges
are flush with the connector.
Notes:
Replace the knife cassette if the cut is
not clean or after stripping approxi-
mately
- 1500 cables with a PVC outer jacket
- 150 cables with a PUR outer jacket
The insulation piercing contacts of the
FC RJ-45 plug can be released and
recontacted up to 10 times.
Cable ends that have had a connector
fitted, must not be used twice but must
be cut off before fitting a new connect-
or.
To assemble a cable with crossed over
wires, connect the color-coded wires at
one end of the cable in the connector
as shown below:
Connect white with yellow
Connect blue with orange.
