Approvals
SCALANCE X-000
40
Operating Instructions, 09/2016, C79000-G8976-C344-02
WARNING
Personal injury and property damage can occur
The installation of expansions that are not approved for SIMATIC NET products or their
target systems may violate the requirements and regulations for safety and electromagnetic
compatibility.
Only use expansions that are approved for the system.
Note
The test was performed with a device and a connected communications partner that also
meets the requirements of the standards listed above.
When operating the device with a communications partner that does not comply with these
standards, adherence to the corresponding values cannot be guaranteed.
EC declaration of conformity
The SIMATIC NET products described in these operting instructions meet the requirements
and safety objectives of the following EC directives and comply with the harmonized
European standards (EN) for programmable logic controllers which are published in the
official documentation of the European Union.
●
2014/34/EU (ATEX explosion protection directive)
Directive of the European Parliament and the Council of 26 February 2014 on the
approximation of the laws of the member states concerning equipment and protective
systems intended for use in potentially explosive atmospheres, official journal of the EU
L96, 29/03/2014, pages. 309-356
●
2014/30/EU (EMC)
EMC directive of the European Parliament and of the Council of February 26, 2014 on the
approximation of the laws of the member states relating to electromagnetic compatibility;
official journal of the EU L96, 29/03/2014, pages. 79-106
●
2011/65/EU (RoHS)
Directive of the European Parliament and of the Council of 8 June 2011 on the restriction
of the use of certain hazardous substances in electrical and electronic equipment
You will find the EC declaration of conformity for these products on the Internet pages of
Siemens Industry Online Support
(
http://support.automation.siemens.com/WW/view/en/33118389/134200
).
The EC Declaration of Conformity is available for all responsible authorities at:
Siemens Aktiengesellschaft
Division Process Industries and Drives
Process Automation
DE-76181 Karlsruhe
Germany
Summary of Contents for SCALANCE X-000
Page 4: ...Table of contents SCALANCE X 000 4 Operating Instructions 09 2016 C79000 G8976 C344 02 ...
Page 10: ...Network topologies SCALANCE X 000 10 Operating Instructions 09 2016 C79000 G8976 C344 02 ...
Page 44: ...Approvals SCALANCE X 000 44 Operating Instructions 09 2016 C79000 G8976 C344 02 ...
