Siemens scalance WLC711, Reference Manual

Page: 395 / 417

assign-ap
Use the assign
-ap
command to add or remove an AP from the site.
The
assign-ap
command is accessible from the site:<named-site> context.
assign-ap (add|delete) ap serial
Parameters
add
|
delete
Specifies whether to add or delete the identified AP.
ap serial
Specifies the AP to be assigned by its serial number.
Usage
You specify the AP by its serial number. If you enter the command without an AP serial number, the CLI
displays a list of available APs by their serial numbers and, if named to the system by an ap:<serial>
context
name
command, the AP name.
Examples
The following example shows a listing of available APs:
WLC.siemens.com
:site:site1# assign-ap
The available APs:
0500009353050067(EWC-3640)
050000829F737045(050000829F737045)
0409920201204015(C25-AP3710)
0500009203050048(C25-AP3705-50048)
0500009203050013(C25-AP3705)
10490066235A0000(AP-3660-Ext)
0509920201203250(EWC-AP-3620-3640-Ext)
0002000819006723(C25-AP4102)
0002010803508865(0002010803508865)
10210066235A0000(C25-AP3705)
This example shows AP added to the site1 site:
WLC.siemens.com
:site:site1# assign-ap add 050000829F737045
assign-policy
Use the
assign-policy
command to assign (or remove) a policy to or from the site.
The
assign-policy
command is accessible from the site:<named-site> context.
assign-policy (add|delete) policy-name
Parameters
add
|
delete
Specifies whether to add or delete the policy.
policy-name
Specifies the policy to be assigned to or removed from the site.
site Commands
assign-ap
SCALANCE WLC711 CLI Reference Guide 395