Siemens SCALANCE W1750D UI Configuration Manual Download

Page: 55 / 570

SCALANCE W User Interface

6.2 Main Window

SCALANCE W1750D UI
Configuration Manual, 02/2018, C79000-G8976-C451-02

6.2.2.5

Maintenance

The Maintenance link displays a window that allows you to maintain the Wi-Fi network. The

Maintenance
window consists of the following tabs:

●

About — Displays the name of the product, build time, AP model name, the SCALANCE

W version, website address of Siemens, and copyright information.

●

Configuration — Displays the following details:
–

Current Configuration — Displays the current configuration details.

–

Clear Configuration — Allows you to clear the current configuration details of the

network.

–

Backup Configuration — Allows you to back up local configuration details. The backed

up configuration data is saved in the file named instant.cfg.

–

Restore Configuration — Allows you to restore the backed up configuration. After

restoring the configuration, the AP must be rebooted for the changes to take effect.

●

Certificates—Displays information about the certificates installed on the AP. You can also

upload new certificates to the AP database. For more information, see Uploading

Certificates (Page 238).

●

Firmware—Displays the current firmware version and provides various options to

upgrade to a new firmware version. For more information, see Upgrading an AP

(Page 471).

●

Reboot—Displays the APs in the network and provides an option to reboot the required

AP or all APs. For more information, see Upgrading an AP (Page 471).

●

Convert—Provides an option to convert an AP to a Mobility Controller managed Remote

AP or Campus

AP, or to the default VC mode. For more information, see Converting an AP to a Remote AP

and Campus AP (Page 474) on page 350.

Summary of Contents for SCALANCE W1750D UI



























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SCALANCE W1750D UI

Reviews:

Related manuals for SCALANCE W1750D UI

Brands by name

Popular brands

Siemens SCALANCE W1750D UI, Configuration Manual

Search results

Summary of Contents for SCALANCE W1750D UI

Reviews:

Related manuals for SCALANCE W1750D UI

Brands by name

Popular brands