Siemens SCALANCE W1750D UI Configuration Manual Download Page 54

Page: 54 / 570

SCALANCE W User Interface

6.2 Main Window

SCALANCE W1750D UI

Configuration Manual, 02/2018, C79000-G8976-C451-02

6.2.2.3

The RF link displays a window for configuring Adaptive Radio Management (ARM) and

Radio features.

●

ARM—Allows you to view or configure channel and power settings for all the APs in the

network. For information on ARM configuration, see ARM Overview (Page 341).

●

Radio—Allows you to view or configure radio settings for 2.4 GHz and the 5 GHz radio

profiles. For information on Radio, see Configuring Radio Settings (Page 351).

6.2.2.4

Security

The Security link displays a window with the following tabs:

●

Authentication Servers—Use this tab to configure an external RADIUS server for a

wireless network. For more information, see Configuring an External Server for

Authentication (Page 209).

●

Users for Internal Server—Use this tab to populate the system’s internal authentication

server with users. This list is used by networks for which per-user authorization is

specified using the internal authentication server of the VC. For more information on

users, see Managing AP Users (Page 197).

●

Roles —Use this tab to view the roles defined for all the Networks. The Access Rules part

allows you to configure permissions for each role. For more information, see Configuring

User Roles (Page 266) and Configuring ACL Rules for Network Services (Page 244).

●

Blacklisting—Use this tab to blacklist clients. For more information, see Blacklisting

Clients (Page 235).

●

Firewall Settings—Use this tab to enable or disable Application Layer Gateway (ALG)

supporting address and port translation for various protocols and to configure protection

against wired attacks. For more information, see Configuring ALG Protocols (Page 250)

and Configuring Firewall Settings for Protection from ARP Attacks (Page 251).

●

Inbound Firewall—Use this tab to enhance the inbound firewall by allowing the

configuration of inbound firewall rules, management subnets, and restricted corporate

access through an uplink switch. For more information, see Managing Inbound Traffic

(Page 254).

●

Walled Garden—Use this tab to allow or prevent access to a selected list of websites. For

more information, see Configuring Walled Garden Access (Page 194).

●

External Captive Portal—Use this tab to configure external captive portal profiles. For

more information, see Configuring External Captive Portal for a Guest Network

(Page 181).

●

Custom Blocked Page URL—Use this tab to create a list of URLs that can be blocked

using an ACL rule. For more information, see Creating Custom Error Page for Web

Access Blocked by AppRF Policies (Page 260).

Summary of Contents for SCALANCE W1750D UI



























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SCALANCE W1750D UI

Reviews:

Related manuals for SCALANCE W1750D UI

Brands by name

Popular brands

Siemens SCALANCE W1750D UI, Configuration Manual

Search results

Summary of Contents for SCALANCE W1750D UI

Reviews:

Related manuals for SCALANCE W1750D UI

Brands by name

Popular brands