Siemens SCALANCE W1750D UI Configuration Manual Download Page 53

Page: 53 / 570

SCALANCE W User Interface

6.2 Main Window

SCALANCE W1750D UI
Configuration Manual, 02/2018, C79000-G8976-C451-02

6.2.2.2

System

This link displays the System window. The System window consists of the following tabs:

Note
Use the Show/Hide Advanced option of the System window to view or hide the advanced

options.

General—Allows you to configure, view, or edit the Name, IP address, NTP Server, and

other AP settings for the VC.

●

Admin—Allows you to configure administrator credentials for access to the VC

Management UI. You can also configure AirWave in this tab. For more information on

management interface and AirWave configuration, see Managing AP Users (Page 197)

and Managing an AP from AirWave (Page 417), respectively.

●

Uplink—Allows you to view or configure uplink settings. See Uplink Configuration

(Page 425) for more information.

●

L3 Mobility—Allows you to view or configure the Layer-3 mobility settings. See

Configuring L3-Mobility (Page 457) for more information.

●

Enterprise Domains—Allows you to view or configure the DNS domain names that are

valid in the enterprise network. See Configuring Enterprise Domains (Page 331) for more

information.

●

Monitoring—Allows you to view or configure the following details:
–

Syslog—Allows you to view or configure Syslog server details for sending syslog

messages to the external servers. See Configuring a Syslog Server (Page 486) for

more information.

–

TFTP Dump—Allows you to view or configure a Trivial File Tranfer Protocol (TFTP)

dump server for core dump files. See Configuring TFTP Dump Server (Page 489) for

more information.

–

SNMP—Allows you to view or configure Simple Network Management Protocol

(SNMP) agent settings. See Configuring SNMP (Page 481) for more information.

●

WISPr—Allows you to view or configure the Wireless ISP-roaming (WISPr) settings. See

Configuring WISPr Authentication (Page 233) for more information.

●

Proxy—Allows you to configure HTTP proxy on an AP. See Configuring HTTP Proxy on

an AP (Page 471) for more information.

●

Time Based Services—Allows you to configure a time profile which can be assigned to

the SSID configured on the AP. See Configuring Time-Based Services. (Page 295)

Summary of Contents for SCALANCE W1750D UI



























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SCALANCE W1750D UI

Reviews:

Related manuals for SCALANCE W1750D UI

Brands by name

Popular brands

Siemens SCALANCE W1750D UI, Configuration Manual

Search results

Summary of Contents for SCALANCE W1750D UI

Reviews:

Related manuals for SCALANCE W1750D UI

Brands by name

Popular brands