Siemens SCALANCE W1750D UI Configuration Manual Download

Page: 297 / 570

Configuring Time-Based Services

17.3 Applying a Time Range Profile to a WLAN SSID

SCALANCE W1750D UI
Configuration Manual, , C79000-G8976-C451-02

297

17.3

Applying a Time Range Profile to a WLAN SSID

To apply a time range profile to a WLAN SSID using the SCALANCE W UI:
1.

Navigate to the WLAN SSID profile configuration wizard
–

Click Network > New or

–

Select an existing WLAN SSID and click edit.

Click Show advanced options.

Click Edit, select a time range profile from the list, then select a value from the Status

drop-down list, and then click OK.
–

When a time range profile is enabled on an SSID, the SSID is made available to the

users for the configured time range. For example, if the specified time range is 12:00–

13:00, the SSID becomes available only between 12 PM and 1 PM on a given day.

–

If a time range is disabled, the SSID becomes unavailable for the configured time

range. For example, if the configured time range is 14:00–17:00, the SSID is made

unavailable from 2 PM to 5 PM on a given day.

Click Next and then click Finish.

Note
If the SSID has two time range profiles enabled with an overlapping duration, the time range

profile will be executed as per the configuration conditions described earlier in this chapter.

For example, if profile1 has 9AM-12PM as the duration and profile2 has 10AM-11AM as the

duration and both are enabled on the SSID, the SSID becomes available only in the time

range 9AM-11AM.

In the CLI
To enable a time range profile on an SSID:

(scalance)(config)# wlan ssid-profile <name>

(scalance)(SSID Profile "<name>")# time-range <name> enable

(scalance)(SSID Profile "<name>")# end

(scalance)# commit apply

To disable a time range profile on an SSID:

(scalance)(config)# wlan ssid-profile <name>

(scalance)(SSID Profile "<name>")# time-range <name> disable

(scalance)(SSID Profile "<name>")# end

(scalance)# commit apply

Summary of Contents for SCALANCE W1750D UI



























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SCALANCE W1750D UI

Reviews:

Related manuals for SCALANCE W1750D UI

Brands by name

Popular brands

Siemens SCALANCE W1750D UI, Configuration Manual

Search results

Summary of Contents for SCALANCE W1750D UI

Reviews:

Related manuals for SCALANCE W1750D UI

Brands by name

Popular brands