Siemens SCALANCE M874 Operating Instructions Manual Download Page 28

Page: 28 / 80

Installation

2.5 Installing on the S7-1500 standard rail

SCALANCE M874, M876

Operating Instructions, 06/2015, C79000-G8976-C331-05

2.5

Installing on the S7-1500 standard rail

Requirement

There is a SIM card for the device.

Installation

Insert the SIM card, see section "SIM card (Page 33)".

Place the first housing guide of the device on the top edge of the standard rail

①

Using a screwdriver, pull down the catch

②

on the rear of the device.

Swing the device down while pulling down the catch

③

. After it is released, the spring

catch locks in place.

Connect the power supply, refer to the section "Power supply (Page 34)".

Fit the connectors for the digital input and digital output, refer to the section "Digital

input/output (Page 37)".

Connect the antenna, refer to the section "Antennas (Page 39)".

Connect the device to the local network, refer to the section "Ethernet port (Page 42)".

Connect the terminal with as short a cable as possible

≤

150 mm and a large cross-

sectional area

≥

2.5 mm² to the ground of the system, see section "Grounding (Page 36)"

Summary of Contents for SCALANCE M874

















































































Search results

Summary of Contents for SCALANCE M874

Reviews:

Related manuals for SCALANCE M874

Brands by name

Popular brands

Siemens SCALANCE M874, Operating Instructions Manual

Search results

Summary of Contents for SCALANCE M874

Reviews:

Related manuals for SCALANCE M874

Brands by name

Popular brands