Siemens SCALANCE M812 Page 68 Operating Instructions Manual Download

Page: 68 / 74

9.2

UK Declaration of Conformity

The UK declaration of conformity is available to all responsible authorities at:

Siemens Aktiengesellschaft
Digital Industries
Process Automation
DE-76181 Karlsruhe
Germany

Importer UK:

Siemens plc,
Manchester M20 2UR

You can find the current UK Declaration of Conformity for these products
on the Internet pages under Siemens Industry Online Support (

https://

support.industry.siemens.com/cs/ww/en/ps/15985/cert

The SIMATIC NET products described in this document meet the requirements of the
following directives:

• UK-Regulation

SI 2016/1107 Equipment and Protective Systems Intended for use in Potentially Explosive
Atmospheres Regulations 2016, and related amendments

• EMC Regulation

SI 2016/1091 Electromagnetic Compatibility Regulations 2016, and related amendments

• RoHS Regulation

SI 2012/3032 Restriction of the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment Regulations 2012, and related amendments

9.2.1

The Equipment and Protective Systems Intended for use in Potentially
Explosive Atmospheres Regulations 2016

Correct usage in potentially explosive atmospheres

The SIMATIC NET products described in these operating instructions meet the requirements of
"The Equipment and Protective Systems Intended for use in Potentially Explosive Atmospheres
Regulations 2016".

Applied standard:

EN / EN IEC 60079-0
Hazardous areas - Part 0: Equipment - General requirements

EN 60079-7
Explosive atmospheres - Part 7: Equipment protection by increased safety "e"

EN / EN IEC 60079-15
Explosive atmospheres - Part 15: Equipment protection by type of protection "n"

Approvals
9.2 UK Declaration of Conformity

SCALANCE M826

Operating Instructions, 10/2022, C79000-G8976-C362-07

Summary of Contents for SCALANCE M812











































































Search results

Summary of Contents for SCALANCE M812

Reviews:

Related manuals for SCALANCE M812

Brands by name

Popular brands

Siemens SCALANCE M812, Operating Instructions Manual

Search results

Summary of Contents for SCALANCE M812

Reviews:

Related manuals for SCALANCE M812

Brands by name

Popular brands