20
Call Waiting Tone Switch
Command-No / Meaning
Parameter value
Default
341 call waiting tone
at a/b1-interface
0 = off
1 = on
1
342 call waiting tone
at a/b2-interface
0 = off
1 = on
1
The call waiting tone is a tone in the receiver signaling an incom-
ing call during a call is already ongoing.
This service is not
available at every network provider.
The incoming call can be answered by finishing the ongoing call
(hook on, SANTIS-ab rings, hook off).
The call waiting tone can be switched off, e.g. if a fax machine or
a modem is connected to the a/b-interfaces.
Restrictions
for
NT+2ab/CA restr.
and
Pairgain:
a/b1 via a/b1 only; a/b2 via a/b2 only.
Summary of Contents for SANTIS-ab
Page 1: ...User Manual for SANTIS ab Subscriber Access and Network Termination for ISDN Services ...
Page 2: ...2 U mains 230VAC 50Hz LED for local feeding SIEMENS LED for remote feeding a b1 a b2 S S ...
Page 27: ...27 7 Pin Allocations of the Sockets Interface Pins a b1 a b2 4 5 S receive 3 6 S transmit 4 5 ...
Page 28: ...Release 1 1 07 96 A1608 X6 A 2 7619 USER11 DOC Siemens Switzerland Ltd ...