background image

S I E M E N S   P T E   L T D  

SX 1 Level 2 Service Manual 

 
 

Copyright © Siemens Pte Ltd. 

 

    

    Siemens Technical Support Centre 

All Rights Reserved 

 

ICM MP CCQ ASP/ASC 

Page 3 of 40   

    Internal Use Only 

GPRS (General Packet Radio Service) 

GPRS is a new non-voice value added services that allows information to be sent 
and received across a GSM mobile telephone network. It supplements today’s Circuit 
Switched Data (CSD) and Short Message Services (SMS). GPRS involves overlaying 
a packet based air interface on the existing circuit switched GSM network. This gives 
the option to use a packet-based data service. The information is split into separated 
but related “packets” before being transmitted and reassembled at the receiving end. 
Theoretically, maximum speeds of up to 171.2 kilobits per second (kbps) are 
achievable with GPRS using all eight timeslots at the same time. This is about 3 
times as fast as the data transmission speed possible over today’s fixed 
telecommunications networks and 10 times as fast as current Circuit Switched Data 
services on GSM networks

.

 

 

 

 

 

Example: Cell with 1 Frequency channel: 
1 physical channel for signaling, 4 physical channels for Circuit switched and 3 physical 
channels 
for Packet switched.

 

 

 

 

 

 

 

 

2  

K-Java Application

 

Summary of Contents for S X 1









































Reviews: