Siemens RUGGEDCOM WIN7225, Installation Manual

Page: 18 / 48

Chapter 2
Installing the Base Station
RUGGEDCOM WIN7225
Installation Guide
10 Mounting the Base Station
II 3 G nA IIC T4 X
P/N: WiN72XX-Y
Pico Base Station
S/N:
XXXXWWYYXXX
WARNING - EXPLOSION HAZARD
DO NOT SEPARATE WHILE CIRCUIT IS LIVE
UNLESS AREA IS KNOWN TO BE SAFE
AVERTISSEMENT - RISQUE D'EXPLOSION
NE PAS DÉBRANCHER TANT QUE LE CIRCUIT EST SOUS TENSION,
À MOINS QU'IL NE S'AGISSE D'UN EMPLACEMENT NON DANGEREUX
Rating: DC 48V, 1A
Class I Division 2 Groups A,B,C,D
T4
Figure 2: Compliance Label (Example)
Section 2.5
Mounting the Base Station
The base station is designed to be mounted to a wall, pole or tower.
DANGER!
Electrocution hazard – risk of death or serious injury. Make sure the distance between the base station
and nearby power lines meets the minimum requirements established by local standards.
CAUTION!
Crushing hazard – risk of death, serious personal injury and/or equipment damage. Make sure the wall,
pole or tower can support the weight of the base station. For more information, refer to Section 4.5,
“Mechanical Specifications” .
NOTE
For detailed dimensions of the base station, refer to Section 4.7, “Dimension Drawings” .
CONTENTS
• Section 2.5.1, “Mounting the Base Station to a Wall or Tower”
• Section 2.5.2, “Mounting the Base Station to a Pole”
• Section 2.5.3, “Assembling the Base Station and Mounting Bracket”
Section 2.5.1
Mounting the Base Station to a Wall or Tower
Mount the base station to any wall or tower capable of supporting its weight. An outer wall on a roof or other high
location to avoid interference from other buildings or trees is preferred.
To mount the base station to a wall or tower, do the following: