Chapter 1
Introduction
RUGGEDCOM WIN7023
Installation Guide
2
Feature Highlights
•
Flexible Deployment
The RUGGEDCOM WIN7023 is a full outdoor base station, designed for easy installation and mounting on poles,
street lamps, towers or walls. The WIN7023 can be equipped with copper or fiber network interfaces for flexible
integration into the operator's backbone.
•
Remote Monitoring and Configuration with RUGGEDCOM NMS
RUGGEDCOM NMS is Siemens's Network Management System software for the discovery, monitoring and
management of RUGGEDCOM products and other IP enabled devices on a network. This highly configurable,
full-featured product records and reports on the availability and performance of network components and
services. Device, network and service failures are quickly detected and reported to reduce downtime.
RUGGEDCOM NMS is especially suited for remotely monitoring and configuring RUGGEDCOM routers, switches,
serial servers and WiMAX wireless network equipment. For more information, contact a Siemens Sales
representative.
CONTENTS
•
Section 1.1, “Feature Highlights”
•
Section 1.1
Feature Highlights
The RUGGEDCOM WIN7023 provides the full base station functionality necessary for serving a single sector:
General
• All-outdoor, single-box base station solution
• Mobile WiMAX compliance based on IEEE 802.16e standard and WiMAX Forum Wave2 (MIMO) certification
• Backbone Ethernet connectivity via a 10/100Base-T network interface
• Fixed and mobile subscriber station support
• 3.5 MHz, 5 MHz, 7 MHz and 10 MHz channel bandwidth support
• MIMO (2×2) support
• Various Radio Frequency (RF) options, including 1.x, 2.x and 3.x GHz band support
Antennas
• 2 × N-Type Antennas
• Supports integrated, external sector or omni-directional antennas
• Built-in GPS
Network Interfaces
• 10/100Base-T Half/Full Duplex IEEE 802.3 CSMA/CD
• ASN-GW Compatibility WiMAX Forum R6, Profile C
• Compatible with Cisco and WiChorus ASN-GW
• Fiber Optic (Optional)
Power Supply
• 85 to 265 VAC
