Siemens RUGGEDCOM RX1510, User Manual, Page: 283 / 856

RUGGEDCOM ROX II
User Guide
Chapter 5
Setup and Configuration
Managing NETCONF 251
Figure 261: BGP Daemon Memory Statistics Form
These forms provides the following information:
Parameter Description
total The total heap allocated (in bytes).
used The number of used ordinary blocks (in bytes).
free The number of free ordinary blocks (in bytes).
Section 5.10
Managing NETCONF
The Network Configuration Protocol (NETCONF) is a network configuration protocol developed by the Internet
Engineering Task Force (IETF). NETCONF provides functions to download, upload, change, and delete the
configuration data on network devices. ROX II devices also support the ability to collect data and perform direct
actions on the device, such as rebooting the device, clearing statistics, and restarting services.
NOTE
For more information about NETCONF and its use, refer to the ROX II NETCONF Reference Guide.
The following sections describe how to configure and manage NETCONF:
•
Section 5.10.1, “Enabling and Configuring NETCONF Sessions”
• Section 5.10.2, “Viewing NETCONF Statistics”
Section 5.10.1
Enabling and Configuring NETCONF Sessions
To enable and configure NETCONF sessions, do the following:
1. Change the mode to
Edit Private or Edit Exclusive .
2. Navigate to admin » netconf . The NETCONF Sessions form appears.