Siemens RUGGEDCOM RX1510, User Manual, Page: 161 / 856

RUGGEDCOM ROX II
User Guide
Chapter 3
Device Management
Managing Device Address Tables 129
2 3 1
Figure 127: Serial Protocols Table
1. Add Button 2. Edit Button 3. Delete Button
3. Click Delete next to the chosen protocol.
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5. Click Exit Transaction or continue making changes.
Section 3.21.10
Managing Device Address Tables
The following sections describe how to configure and manage Device Address tables:
•
Section 3.21.10.1, “Viewing a List of Device Address Tables”
• Section 3.21.10.2, “Adding a Device Address Table”
• Section 3.21.10.3, “Deleting a Device Address Table”
Section 3.21.10.1
Viewing a List of Device Address Tables
To view a list of Device Address tables configured for a serial port using the DNP protocol, navigate to interface »
serial » {slot/port} » protocols » dnp » setdnp » device-table , where {slot/port} is the slot name and port
number of the serial port. If Device Address tables have been configured, the DNP Device Address Table
Configuration table appears.
Figure 128: DNP Device Address Table Configuration Table
If no Device Address tables have been configured, add tables as needed. For more information, refer to
Section 3.21.10.2, “Adding a Device Address Table” .