RUGGEDCOM RX1000P
Installation Guide
Chapter 6
Certification
Agency Approvals
41
Certification
The RX1000P device has been thoroughly tested to guarantee its conformance with recognized standards and
has received approval from recognized regulatory agencies.
•
Section 6.1, “Agency Approvals”
•
•
Section 6.3, “Industry Canada Compliance”
•
Section 6.4, “EMI and Environmental Type Tests”
•
Section 6.5, “Cellular Modem Certifications”
Section 6.1
Agency Approvals
Agency
Standards
Comments
CSA
CSA C22.2 No. 60950-1, UL 60950-1
Approved
CE
EN 60950-1, EN 61000-6-2, EN
55022, EN 60825-1, EN 50581
CE Compliance is claimed via
Declaration of Self Conformity Route
FCC
FCC Part 15, Class A
Approved
FDA/CDRH
21 CFR Chapter I, Sub-chapter J
Approved
Section 6.2
FCC Compliance
This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference in which case the user will be required
to correct the interference on his own expense.
Section 6.3
Industry Canada Compliance
CAN ICES-3 (A) / NMB-3 (A)
