Siemens RUGGEDCOM RSL910, Installation Manual

Page: 28 / 48

Chapter 3
Device Management
RUGGEDCOM RSL910
Installation Guide
18 Connecting to the Device
1
2
Figure 10: Console Ports
1. USB Type-B Console Port 2. Serial DB9 Console Port
Use the following settings to connect to either port:
Speed 57600 baud
Data Bits 8
Stop Bit 1
Parity None
Flow Control Off
Terminal ID VT100
The serial console port implements RS232 DCE (Data Communication Equipment) on a DB9 connector. The
following is the pin-out for the port:
1
5
9 6
Figure 11: Serial DB9 Console Port
Pin Name Description
1
a
Reserved (Do Not Connect)
2 TX Transmit Data
3 RX Receive Data
4
a
Reserved (Do Not Connect)
5 GND Signal Ground
6
a
Reserved (Do Not Connect)
7
b
Reserved (Do Not Connect)
8
b
Reserved (Do Not Connect)