Siemens RUGGEDCOM RS930L, Manual

Page: 12 / 48

Introduction
1.2 Description
5
2
1
4
3
3
6
7
8
1
POWER LED
2
ALARM LED
3
EoVDSL Ports
4
Copper (10/100Base-TX) Ethernet Ports
5
RS232 Console Port (Serial)
6
Failsafe Alarm Relay
7
Chassis Ground Connection
8
Power Supply Terminal Block
Figure 1.1 RUGGEDCOM RS930L
POWER LED Illuminates green during boot up and when power is supplied to the
device.
ALARM LED Illuminates red when an alarm condition exists.
Console Port The serial console port is for interfacing directly with the device
and accessing initial management functions. For information
about connecting to the device via the serial console port, refer to
"Connecting to the Device (Page 17)" .
Communication Ports Communication ports in general receive and transmit data, as
well as provide access to the RUGGEDCOM ROS Web interface.
For more information about the various ports available, refer to
" Communication Ports (Page 19)" .
Failsafe Alarm Relay Latches to default state when a power disruption or other alarm
condition occurs. For more information, refer to:
•
"Connecting the Failsafe Alarm Relay (Page 10)"
• "Failsafe Alarm Relay Specifications (Page 28)"
Power Supply Terminal Blocks Pluggable terminal blocks for connecting one or more power
sources. For more information, refer to "Connecting Power (Page
11)" and "Power Supply Specifications (Page 27)" .
RUGGEDCOM RS930L
Installation Manual, 04/2021, C79000-G8976-1034-09
3