Siemens RUGGEDCOM RS900L, Installation Manual

Page: 12 / 50

Introduction
1.2 Description
7
2
3
1
5
4
6
8
9
10
1
POWER LED
2
ALARM LED
3
RESET Button
4
[Optional] Copper (10/100Base-TX) or Fiber Optic (100Base-FX) Ethernet Ports
5
Copper (10/100Base-TX) Ethernet Ports
6
EoVDSL Port
7
RS232 Console Port (Serial)
8
Failsafe Alarm Relay
9
Chassis Ground Connection
10
Power Supply Terminal Block
Figure 1.1 RUGGEDCOM RS900L
POWER LED Illuminates green during boot up and when power is supplied to the
device.
ALARM LED Illuminates red when an alarm condition exists.
Console Port The serial console port is for interfacing directly with the device
and accessing initial management functions. For information
about connecting to the device via the serial console port, refer to
"Connecting to the Device (Page 19)" .
RESET Button Shuts down and restarts the device. For more information, refer to
"Resetting the Device (Page 20)" .
Communication Ports Communication ports in general receive and transmit data, as
well as provide access to the RUGGEDCOM ROS Web interface.
For more information about the various ports available, refer to
" Communication Ports (Page 21)" .
Failsafe Alarm Relay Latches to default state when a power disruption or other alarm
condition occurs. For more information, refer to:
•
"Connecting the Failsafe Alarm Relay (Page 12)"
• "Failsafe Alarm Relay Specifications (Page 30)"
RUGGEDCOM RS900L
Installation Manual, 04/2021, C79000-G8976-1027-09
3