Siemens RUGGEDCOM RS416P, Installation Manual, Page: 53 / 54

RUGGEDCOM RS416P
Installation Guide
Chapter 6
Certification
EMC and Environmental Type Tests 43
Test Description Test Levels Severity Levels
AC Power ports ± 4 kV line-to-earth, ± 2 kV line-to-line 4
Signal ports 10 V 3
DC Power ports 10 V 3
AC Power ports 10 V 3
IEC 61000-4-6 Induced (Conducted) RFI
Earth
ground ports
10 V 3
100 A/m Note
a
IEC 61000-4-8 Magnetic Field Enclosure ports
1000 A/m for 3 s 5
DC Power ports 30% for 0.1 s, 100% for 0.05 s IEC 61000-4-29
IEC 61000-4-11 Voltage Dips and Interrupts
AC Power ports 30% for 1 period, 100% for 5
periods, 100% for 250 periods
Signal ports 2.5 kV common, 1 kV
differential mode @ 1 MHz
3
DC Power ports 2.5 kV common, 1 kV
differential mode @ 1 MHz
3
IEC 61000-4-12 Damped Oscillatory
AC Power ports 2.5 kV common, 1 kV
differential mode @ 1 MHz
3
Signal ports 30 V Continuous, 300 V for 1 s 4 IEC 61000-4-16 Mains Frequency Voltage
DC Power ports 30 V Continuous, 300 V for 1 s 4
IEC 61000-4-17 Ripple on DC Power Supply DC Power ports ± 15% 4
Signal ports 2 kVAC (Fail-Safe Relay output)
DC Power ports 1.5 kV
Dielectric Strength
AC Power ports 2 kV
Signal ports 5 kV (Fail-Safe Relay Output)
DC Power ports 5 kV
IEC 60255-5
HV Impulse
AC Power ports 5 kV
a
Siemens specified severity level.
IEEE 1613 EMC Immunity Type Tests
NOTE
The RUGGEDCOM RS416P meets Class 2 requirements for an all-fiber configuration and Class 1
requirements for copper ports.
Description Test Levels
Enclosure Contact ± 8 kV ESD
Enclosure Air ± 15 kV
Radiated RFI Enclosure ports 35 V/m
Fast Transient Signal ports ± 4 kV @ 2.5 kHz