RUGGEDCOM ROX II
CLI User Guide
Chapter 13
Unicast and Multicast Routing
Adding a Route Map Filter Entry
483
1. Make sure the CLI is in Configuration mode.
2. Add the new filter by typing:
routing
bgp filter route-map
tag
Where:
•
tag
is the tag for the route map filter
3. Add one or more entries. For more information, refer to
Section 13.8.2.4, “Adding a Route Map Filter Entry”
.
4. Type
commit
and press
Enter
to save the changes, or type
revert
and press
Enter
to abort.
Section 13.8.2.4
Adding a Route Map Filter Entry
To add an entry for an route map filter, do the following:
1. Make sure the CLI is in Configuration mode.
2. Add the new filter by typing:
routing
bgp filter route-map
tag
entry
number
Where:
•
tag
is the tag for the route map filter
•
number
is the sequence number for the entry
3. Configure the following parameter(s) as required:
Parameter
Description
action { action }
Synopsis:
{ deny, permit }
Default:
permit
Action.
call { call }
Synopsis:
A string
Jump to another route-map after match+set.
on-match-goto { on-match-goto }
Synopsis:
A string
Go to this entry on match.
4. Configure the match rules for the route map filter. For more information, refer to
.
5. Configure a set for the route map filter. For more information, refer to
Section 13.8.2.8, “Configuring a Set”
6. Type
commit
and press
Enter
to save the changes, or type
revert
and press
Enter
to abort.
Section 13.8.2.5
Deleting a Route Map Filter
To delete a route map filter for dynamic BGP routes, do the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the filter key by typing:
Summary of Contents for RUGGEDCOM ROX II
