RUGGEDCOM ROX II
CLI User Guide
Chapter 7
IP Address Assignment
Configuring Subnet Options
237
Parameter
Description
The shared-network that this host belongs to.
Parameter
Description
network-ip { network-ip }
Synopsis:
A string 4 to 43 characters long
The network IPv6 address for this subnet.
This parameter is mandatory.
shared-network { shared-network }
Synopsis:
A string
The shared-network that this host belongs to.
4. Configure the options for the subnet. For more information, refer to
Section 7.3.8.3, “Configuring Subnet
.
5. Type
commit
and press
Enter
to save the changes, or type
revert
and press
Enter
to abort.
Section 7.3.8.3
Configuring Subnet Options
To configure options for a subnet, do the following:
NOTE
Options set at the subnet level override options set at the DHCP server level.
1. Make sure the CLI is in Configuration mode.
2. Navigate to:
•
For IPv4
services
dhcpserver subnet-name
name
options
•
For IPv6
services
dhcpserver6 subnet6-name
name
options
Where:
•
name
is the name of the subnet
3. Configure the leased time settings by configuring the following parameter(s):
•
For IPv4:
Parameter
Description
default { default }
Synopsis:
A 32-bit unsigned integer
Default:
600
The minimum leased time in seconds that the server offers to the clients.
maximum { maximum }
Synopsis:
A 32-bit unsigned integer
Default:
7200
The maximum leased time in seconds that the server offers to the clients.
•
For IPv6:
Parameter
Description
default { default }
Synopsis:
A 32-bit unsigned integer
Default:
600
Summary of Contents for RUGGEDCOM ROX II
